Specifications:

The Cell Diag is designed for 2-6 cells(DIAG 6X) Li-Po batteries with balance charging port.

Working Temperature Range: －20℃ to 50℃

Weight:  10g

Dimension: 53x 29x 5mm

Features:

1, Small, light and ultra-portable with only 5mm thickness including the LCD screen.

2, The high resolution LCD screen has a display capability of cell count, individual cell voltage, and total pack voltage simultaneously, up to 6 cell (for CellDIAG6X)

3, High precision with +/-0.01V (10mv) accuracy.

4, It is not only able to measure the Li-Po, Li-Fe battery packs via balancing port, but also capable for checking ordinary Ni-CD, Ni-HM and other battery packs with no balancing port (the optional connection adapter is necessary), such as 4.8V receiver pack.

5, Able to direct observe the battery pack balancing condition efficiently.

6. Cell/ Pack voltage data monitoring for chargers with no voltage display. Improve the charging process safety and reliability. (Optional Y Connection adapter is necessary)

Remarks and attentions:

-          Due to the battery pack loading drop, to avoid the voltage checking difference/ error, make sure the battery pack is disconnected from the loading, and observe the reading 30 seconds later the disconnection.

-          Data display refresh rate may drops in low temperature environment. This is normal because of the LCD panel characteristics.

-          Although it is a device with ultra low power consumption, make sure disconnect the battery after use to void over discharge/ damage to the battery.

Related comments  ：