Maxpro X6 Intelligent Charger(free shipping)

Select Currency

: User ID：
Password：
Register | Forgot Password

Item：	Maxpro X6
Brand：
Unit：	1 unit
Weight：	0.550 kg
Features：
List Price：	$170.00
Price：	$135.00 Save:$35.00
Total Rate：	Review Summary:0reviews \| Write a Review

Detail Product Review Write a Review Send to Friend

Features：

1. The X6 is a multi-function intelligent charger with high efficiency digital power system. It can charge or discharge

Li-Po / Li-Ion / Li-Mn / Li-Fe / NiMH / NiCD / Pb

2. The X6 has a built in Balancer; it will balance individual cells when charging Lithium Batteries.

3. The X6 has a 16*2 backlit LCD that displays the charging cycle, battery voltage, charge current, pack temperature,

capacity (added or removed) and charge/discharge times.

4. The X6 can also be connected to any windows based PC via a serial port and with it’s very comprehensive monitoring

and analysis software (included), you can keep up-to-date information for all your batteries.

5. The X6 provides you the ability to charge and discharge your batteries with ease and safety. Automatic FAN control.

6. The X6 has programmable various charge settings for Li-xx battery (Normal /Fast /Slow /Storage /Balance), and also

has a cycle function with a maximum of 5 cycles.

7. The X6 is equipped with a very accurate temperature sensor (included) to safeguard your packs during charging/discharging.

It will stop the charging or discharging if the selected temperature that you selected in the user set-up is reached.

8. The X6 can be upgraded with the PC software (included), it will download updates from our MAXPRO internet site and install

these updates on your X6, it can also install updates from Hard Drive or CD in case you have no internet access. No need to

return it to us when new software is needed.

Specifications:

1. Input power capacity: 11~15V DC 10Amp at maximum charge rating

2. Charge battery type:

2-6 cells Li-Po / Li-lon / Li-Mn,

1-8 cells Li-Fe

1-18 cells NiCD/NiMH

1-12 cells Pb

The maximum charge/discharge voltage is 32V.

3. Charge current is adjustable in 0.1A increments from 0.1A to 5A with the maximum rate of 100W.

4. Discharge current is adjustable in 0.1A increments from 0.1A to 2A with the maximum rate of 12W.

5. Max. balance charge current: 400mA

6. Maximum rate of charge capacity: 9900mAH

7. Resolution of the voltage detection: 5mV

8. Resolution of the temperature detection: 0.1°C

9. Power conversion efficiency: >94%.

10.Size:145x103x34mm / Weight:445g

LCD display abbreviations:

● CHG / CH: Charge mode

● DSCH / DH: Discharge mode

● CYCLE: Discharge/Charge cycle mode

● CC: Constant current charging

● CV: Constant voltage charging

● ST: Initial charging of Li-xx battery

● TR: Trickle charging of NiMH/NiCd Battery

● IV: Imbalance voltage between cells

Lithium battery balance charging information

The MAXPRO X6 can Balance charge three types of lithium cells (Li-Po/Li-Ion/Li-Mn), and charge Li-Fe.

As a safety feature the X6 will not charge Li-xx batteries that do not have a balance charging connector. (LiFe excluded), and only one cable should be connected to the X6 balancer.

The MaxPro X6 has 5 charging modes; FAST / NORMAL / SLOW / STORAGE / BALANCE.

	FAST	NORMAL	SLOW	STORAGE	BALANCE
Charge current during CC	1C	1C	0.5C	0.5C	Auto balance current
Charge current during CC	Max.charge current:5A/100W			Max.CH current:5A Max.DH current: 2A/12W	Max.balance current:400mA
Cut-off current during CV	1/10C	1/20C	1/20C	Max.CH current:5A Max.DH current: 2A/12W	This mode is used to bring “out of balance” packs that are too imbalanced to charge.
Cut-off voltage ( V/cell )	Li-Po & Li-Mn 4.20V, Li-Ion 4.10V			CH->3.85V DH->3.80V

▼▼▼ NOTE: Although FAST MODE and NORMAL MODE charge have the same 1C current. There can be a difference in charging time due to the different stopping current. The charge can finish within one and a half hours in the FAST Mode. But In the NORMAL Mode, they can take up to two and a half hours.

Unbalanced pack charging limitations:

1) When a pack with an imbalance of larger than 200mV between cells is connected, only the BALANCE charging mode can be used.

2) When a pack with an imbalance of 100mV to 200mV between cells is connected, only the SLOW charging mode can be used.

3) When a pack with an imbalance of 50mV to 100mV between cells is connected, SLOW or NORMAL charging modes can be used.

4) When a pack with an imbalance of less than 50mV between cells is connected, any of the charging modes can be used.

	Li-Po	Li-Ion	Li-Mn	Li-Fe	NiMH/NiCD	Pb
Voltage level	3.7V/cell	3.6V/cell	3.7V/cell	3.3V/cell	1.20V/cell	2.0V/cell
Max. charge voltage	4.2V/cell	4.1V/cell	4.2V/cell	3.6V/cell	1.60V/cell	2.45V/cell
Allowable fast charge current	1C or less	1C or less	1C or less	4C or less	1C - 2C	0.4C or less
Discharge voltage cutoff level	3.0V/cell	2.75V/cell	2.75V/cell	2.0V/cell	0.85V/cell	1.80V/cell

	CH cut-off voltage	DH cut-off voltage	Temperature	Delta Peak
Li-Po	4.16~4.20V/cell (4.20)	2.75~3.60V/cell (3.30)	40~50°C (45°C)
Li-Ion	4.00~4.10V/cell (4.10)	2.75~3.60V/cell (3.30)
Li-Mn	4.16~4.20V/cell (4.20)	2.50~3.60V/cell (3.30)
Li-Fe	3.40~3.60V/cell (3.60)	2.00~2.50V/cell (2.50)
NiMH	1.45~1.60V/cell (1.50)	0.80~1.10V/cell (1.00)		3~10mV (5)
NiCD	1.45~1.60V/cell (1.50)	0.80~1.10V/cell (1.00)		5~20mV (10)
Pb	2.30~2.45V/cell (2.40)	1.80~2.00V/cell (1.80)

Discharge function Instructions:

The MaxPro X6 can be set to various discharge voltages, depending on the battery chemistry, the battery will be automatically discharged to the level you select.
For Li-Po and Li-Ion batteries, you can set the cutoff voltage from 3.0V/Cell to 3.6V/Cell, Li-Mn batteries can be set from 2.75V/Cell to 3.6V/Cell, Li-Fe batteries can be set from 2.00V/Cell or higher, Ni-xx batteries can be set from 0.8V/Cell to 1.2V/Cell and Pb Batteries can be set from 1.8V/Cell to 2.0V/Cell.

Cycle Mode

The MaxPro X6 can be set to cycle any of the battery chemistries supported from 1 to 5 cycles.

Setup Menu Instructions

In the MaxPro X6 Setup menu you can set the maximum charging voltage/cell of all the supported battery chemistries.

Connection guide for charging two packs of 3S Lipo

▼▼▼READ FOLLOWING WORDS FIRST

1. Maxpro X6 intelligent charger allows you to charge either two 3S packs, or three 2S packs as a single 6S pack, but the packs capacity should be the same, and the voltage imbalance is not big.

<P class

Total Rate：

Review Summary: 0 reviews

Write a review

Sort by： Search:

Click here login to write a review.

Related Products

E-Mail: info@elemodel.com dealer@elemodel.com Fax: (+86)712 2859755(Auto)
Customer Support Hours M-S: 8:30 AM - 5:30 PM BIH (Excluding National Holidays)
Copyright 2003-2007 elemodel.com, All Rights Reserved

Processed in 0.435 second(s)
Gzip enabled.