Specifications:

Operating voltage range: 10.0~18.0 Volt

Circuit power: max.50W

Charge current range: 0.1~5.0A

Current drain for balancing Li-po: 200mAh/cell

NICd/NiMH battery cell count: 1~14cell

Li-ion/Polymer cell count: 15 series

Pb battery voltage: 6V 12V

Weight: 280g

Dimensions: 130*80*23mm

Special features:

Voltage balancer for Li-polymer battery inside.

So it does not need any balancer separately when charging lipo battery for cell balancing.

Maximum safety:

Delta-peak sensitivity: The automatic charge termination program works on the principle of the Delta-peak voltage detection.

Capacity limit: the charging capacity always calculated by multiple of the charging always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.

Processing time limit: you can also restrain the maximum process time to prevent from any possible defect.

Input power monitor: to protect the car battery using as input power from being damaged the voltage of it always monitored. If it drops below the lower limit the process will be ended automatically.