- Cleaning Up
- Special offer
- R/C Plane
- R/C Electric Helicopters
-
〖ALIGN T-REX〗
〖ELE Firefox 200〗
〖ARK-X500〗 〖ELE Firefox-100〗 - Parts Of EP Helicopters
-
〖450 compatible parts〗
〖Firefox-200 Parts〗
〖Firefox-100 Parts〗 - Power System
-
〖ELE Outrunner〗
〖ELE Inrunner〗
〖TowerPro Motors〗 〖Emax Motors〗
〖Motor Accessories/Mounts/Gears〗 〖Combo〗
〖Ducted Fan Power System〗 〖Gearbox Power System〗
Contra-rotating motors - Brushless ESC
-
〖Advance Series〗
〖EA Series〗
〖Power Series〗 〖JETI ESC〗
〖E-Hobby Series〗 〖Towerpro Series ESC〗
〖UBEC〗 - Propeller
-
〖Direct&hyper drive〗
〖Reduction series〗
〖Dynamic fan〗 〖For helicopter〗
〖APC Propeller〗 〖Tower Pro Propeller〗
〖Folding propeller〗 - Servo
-
〖GWS Servos〗
〖Towerpro Servos〗
〖ESKY Servos〗 〖ELE Servos〗
〖Servo Accessories〗 - Aux Circuit
-
〖Mixer〗
〖Be Found〗
〖Fail Safe〗 〖Battery Monitor〗
〖Tester〗 - Other products
-
〖Landing gear〗
〖Spinner〗
〖Pinion gear puller set〗 〖Drive shaft〗
〖Tire wheels〗 〖Prop saver〗
〖Heat sink〗 〖Simulator〗
〖Scales〗 Bearing
〖Wires/Connectors etc.〗
GW/F4U-EPS350C/B
|
Length |
727 mm ( 28.6 in) |
||||
|
Wing Span |
901 mm ( 35.5 in) |
 |
Blue color : |
GW/F4U-EPS350C/B | |
|
Wing Area |
15dm² (232.5 sq.in) |
|
W/ EPS-350C or EPS-400Cpower system set and propeller. | ||
|
Flying Weight |
420~500g (14.8~17.6 oz) |
||||
|
Wing Loading |
28~33 g/dm² (10~11.8 oz/sq.ft.) |
||||
|
Power System |
|||||
|
Propeller |
EP9070 / EP8060 |
||||
|
Battery Required |
AA or AAA / 400mAh above 7.2V~9.6V / Ni-Cd or Ni-MH |
  | |||
|
Servo |
|||||
|
Receiver |
|||||
|
Speed controller |
|||||
|
Radio Required |
4-Channel radio |
||||
GW/F4U-EPS400C/B
|
Length |
727 mm ( 28.6 in) |
||||
|
Wing Span |
901 mm ( 35.5 in) |
|
Blue color : |
GW/F4U-EPS400C/B | |
|
Wing Area |
15dm² (232.5 sq.in) |
|
W/EPS-400C/BB power system set and propeller. | ||
|
Flying Weight |
420~500g (14.8~17.6 oz) |
||||
|
Wing Loading |
28~33 g/dm² (10~11.8 oz/sq.ft.) |
||||
|
Power System |
|||||
|
Propeller |
EP9070 / EP8060 |
||||
|
Battery Required |
| ||||
|
Servo |
|||||
|
Receiver |
|||||
|
Speed controller |
|||||
|
Radio Required |
4-Channel radio |
||||
[ Aileron Linkage up-grade Referance sheet ]
 |
 |
 |
 |
| 1. | Drill a small hole in the middle of the main wing as shown. |
| 2 | Insert the "Y" cord through the hole. |
| 3 | Put the "Y" cord into the bottom of the main wing as shown. |
| 4 | Connect the servo wire to the "Y" cord and wrap with tape to preventing from its loosening. |
 |
 |
 |
| 5 | Put the aileron servo into the indicated place as shown. (Note:We will need to cut a suitable size for the groove before inserting and fixing it on the main wing. |
| 6 | Connect the "Y" cord to receiver. |
| 7 | Complete. |
| Total Rate： | Review Summary: 0 reviews | Write a review |
Related Products
- I paid online by Credit Card, but why it was not available?
- Can you tell me your return policy for the defective merchandise?
- What shipping methods do you ELE provide?
- Can I add, change or remove items from my order after it has been submitted?
- Why does one item always remain in my shopping cart?
- I am a foreigner in Shanghai, want to shop in your website, but do you accept RMB payment?
 |
E-Mail: info@elemodel.com dealer@elemodel.com Fax: (+86)712 2859755(Auto) |
| Powered by ShopEx | |
| Processed in 0.074 second(s) Gzip enabled. |